Immersion Cooling Tank

Mounted on a solid, formed base made of heavy-gauge, galvanized steel, the QCC2 includes hermetic scroll compressors, an air-cooled condenser, and a weather resistant microprocessor control center. While central air-cooled chillers are typically located outside, most portable air-cooled chillers are located indoors, where they send a stream of warm air directly from the condenser fan to the plant floor. This may be undesirable except during cool weather when the warm airflow produced by the condenser fan can supplement a plant’s space heating system.

Refurbished and tested at our Clinton, MA shop, where it was cleaned, painted, checked and leak tested, and run for several days and monitored. 460v, 3p, power, has scroll compressor, and 30°F to 65°F fluid temperature range. This is an indoor chiller, yet the exhaust can be ducted outside if you choose . We have provided dozens and dozens of these units over the years and they are well-built true workhorses. An Air cooled chiller system is designed to use ambient air surrounding the condensing unit to cool a refrigerant back into a liquid once it has absorbed heat from the process.

An Air-Cooled Chiller is basically a refrigeration system that works by transferring the heat energy from fluids. Air-Cooled Chillers are used in a wide variety of settings and industries including medical, pharmaceutical, chemical, biotechnology, semiconductor, food, construction, plastic, and many others. To protect the chiller from inclement weather, the outdoor chiller may be installed in a pre-fabricated, insulated walk-in enclosure. Condenser and water piping to be heat traced for freeze protection. The electrical systems within a chiller are carefully designed and as complex as the rest of the machine.

 Air to Water Heat Pumps

Aqua Series chillers make their noise in the marketplace, not the workplace. The AquaSnap chiller’s low-sound AeroAcoustic® fan produces up to half the sound level of the propeller fan. Much of the noise reduction is in frequencies where noise is most annoying, which makes AquaSnap chillers ideal for sound-sensitive environments. We are proud to provide exceptional walk-ins and blast chillers.

Portable, air cooled style chillers refers to a configuration that contains a refrigeration circuit, a reservoir and pump, along with controls. Aqua Logic® Delta Star® in-line, air cooled, water chillers are built with helical titanium evaporator coils for maximum cooling efficiency. Titanium is safe for all aquatic animals in fresh or salt water systems. The low profile design allows for easy placement in tight places and the quiet, internal, spring-mounted hermetic motor/compressor provides years of reliable service.

Arrived at KIG in March 2016 was this never used, never installed, 2014 Koolant Koolers / Dimplex Thermal 1.5 ton Air Cooled Chiller. This unit is in original crate, and is a solid USA made indoor portable chiller with a pump and tank, and offered with money back guarantee. Unit was run and tested completely at our 13,000 square foot facility prior to shipping. Arrived at KIG in November 2020 is this very high-end Riedel outdoor packaged chiller.

There is a BacNet IP card installed and operational All compressors operate properly. 100 PSI low pressure and 132 High pressure with liquid refrigerant present in both circuit liquid lines. The controls indicate that there is 2185 operating hours on each circuit with 2575 starts. Condenser coils appear to be in good condition with no evidence of leaks. Plate and frame evaporator has good insulation with no evidence of leaks. Arrived in January 2018 to KIG were two Carrier Aquasnap 40 ton Air Cooled Chillers.

Although this is currently on Budzar’s site, it references older refrigerant and some other differences. This unit arrived in early October 2014, and went through refurbishment at KIG. Each unit was RUN and TESTED thoroughly in our Massachusetts shop prior to shipping. Unit was run and tested at KIG facility in Clinton MA by our own chiller technician. This unit arrived at KIG’s shop first week of July 2014, and went through testing and refurbishment.

In the AHUs and FCUs, the chilled water is passed through a heat exchanging coil to reduce the temperature of the coil. The chilled water that exits a chiller is called the chilled water supply . The condenser is a configuration of horizontal pipes through which hot refrigerant runs. Air is moved across the condenser to dissipate unwanted heat. The compressor provides the driving force for moving the refrigerant around the system. Three of them use positive displacement to create pressure, and the fourth creates pressure with centrifugal force.

The report effectively covers all the aspects related to this industry over the projected period and the primary development trends of the market, over the forecast period ( ). It pins points to key opportunities available in the global Medical Water Chillers market through leading segments. The report offers a closer look at current market conditions and future market opportunities, along with drivers, trend segments, consumer behavior, price factors, and market performance and estimates.