Aermec Modular Chillers

So, if water cost, quality and conservation are of concern, an air-cooled chiller may be the better choice. Most models are qualified for use with low GWP refrigerants, making them compliant with the majority of modern refrigerant regulations. Our air-cooled comfort cooling chillers use ambient air to cool your environment. These cost-effective systems are energy-efficient, take up minimal space, and are relatively quick and easy to install.

Here are the key differences you need to know as you look at AC installation in Loganville, GA. Water condensing, air condensing and split systems all available in a wide range of cooling capacities. BluChill is your source for quality industrial chillers, competitive prices and fast, friendly service.

The internal tank helps maintain cold water temperature and prevents temperature spikes from occurring. The water flows from the chiller to the application’s point of use and back. Air-cooled and evaporative cooled chillers are intended for outdoor installation and operation. Air-cooled machines are directly cooled by ambient air being mechanically circulated directly through the machine’s condenser coil to expel heat to the atmosphere.

Aqua Logic’s Delta Star® in-line TITANIUM water chillers were first introduced to the aquatic market in 1989 and quickly became the industry standard for their quality craftsmanship and exceptional performance. For more than 25 years that same attention to detail has gone into every unit we’ve manufactured. Active response control – Monitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and status of the unit is provided. Because we develop everything in-house, we are able to continuously improve our products and technologies, such as our Daikin Inverter Screw Compressor, and our heat exchanger and condensing coil technologies.

Camping Tent Air Conditioner

A water cooled water chiller does not have fans, it uses a secondary water source for the condenser cooling. This unit is 460 volt and originally designed to cool laser machines. It has 2 compressors, a primary tank and a secondary tank, and a primary pump and a smaller secondary pump. For a non laser application we will modify and disable the smaller pump and tank and you will still get the full amount of 6 tons of cooling. ICS Chillers offers a full range of industrial air cooled chiller packages. Each chiller is custom built to efficiently support your specific process cooling requirements.

The main difference is that one uses air to fuel condenser cooling and the other uses water. In this article we will be looking at how air cooled chillers work. Air cooled chillers are very common, especially in small to medium size commercial and office type buildings. They are usually located externally, either up on the roof or at ground level. Scroll to the bottom to watch the tutorial video on this subject. The growing industrialization in several countries across the world has led to an increase in the number of industrial manufacturing units.

Air-cooled chillers rely on a condenser cooled by the environment air. Thus, air-cooled chillers may find common application in smaller or medium installations where space constraints may exist. An air-cooled chiller can represent the most practical choice in scenarios where water represents a scarce resource. The refrigerant then flows to a compressor, which performs multiple functions.

Required for applications where the unit will need to maintain a very cold temperature. Provides both the lowest water temperature and the most broad temperature range. Amount of refrigerant does not need to change since the water temperature is being maintained at a constant. Modular strategy – Modular design of the mechanical and control systems allow for gradual build-up of the cooling infrastructure to match the cooling demand of the facility.